SIMA LABS (Sophisticated Industrial Materials Analytic Labs Pvt. Ltd.)

In electrical and electronic engineering, a current clamp, also known as current probe, is an electrical device with jaws which open to allow clamping around an electrical conductor. This allows measurement of the current in a conductor without the need to make physical contact with it, or to disconnect it for insertion through the probe.

Current clamps are typically used to read the magnitude of alternating current (AC) and, with additional instrumentation, the phase and waveform can also be measured. Some clamp meters can measure currents of 1000 A and more. Hall effect and vane type clamps can also measure direct current (DC).

·          Better low speed stirring with even small liquid volume.

·          Better quality motor for higher Torque at low speeds.

·          Stirring accomplished by small Teflon coated magnetic paddle.

·          Paddle size as per Magnetic stirrer cap. Requirement.

·           Better mineral/Glass-wool Insulated.

·           Accurate speed control & Temperature control.

·           S. Steel 304 grade Top housing.

·           Better quality Kanthal heaters all fire proof wiring connection better durability.

·         The motor stirrer having maximum speed up to 4000 r.p.m unit is clamped to a CP. rod fitted on a heavy cast iron base.

·          The height and angle of the stirrer can be adjusted according to the requirement.

·         Available In Size
Without Drill Chuck-IIC158.

·         Unique design of outer MS body having powder coated with gap of cast Iron top from the body.

·         Kanthal A-1 superior quality coil shaped heater duly embedded in the cast Iron plate to avoid, heat loss having Cera Blanket Insulation.

·          All electrical connection are fire proof having sleeve for Heat/Temperature Protection

·         Temp. Range is from Ambient to 300°C.

·          Temp. Controlled by thermostat controller

·          Cast Iron top is having 7.5" Diameter having heat resistant Paint.

General Specification

• Measurement Ranges :
Earth Resistance : 0-20Ω / 0-200Ω / 0-2000Ω
Earth Voltage : 0-200V AC (40-500Hz)

• Accuracy :
Earth Resistance : ±(2%rdg + 2dgts) or ± 0.1Ω which is greater.
Earth Voltage : ±(1%rdg + 2dgts)

• Earth Resistance Resolution : 0-20Ω (0.01Ω); 0-200Ω (0.1Ω); 0-2000Ω (1Ω)
• Display LCD :- 3½ Digit 2000 counts LCD Back-light display.
• Measurement System : Earth resistance by constant current inverter 820Hz approx. 2mA
• Low Battery Indication : “B” symbol appears on the display
• Data Hold Indication : “DH” symbol appears on the display
• Over Range Indication : “1” (MSD)
• Open Circuit Indication : LED will be unlit
• Power Supply : 1.5 V X 6.Type AA batteries.
• Dimensions : 163(L) X 102(W) X 50(D)mm
• Weight : 480g approx.(battery included)

• Compact size, easy to operate
• Provides accurate and repeatable measurements on easy to read scale
• Requires only 2 or 3 drops of solution
• The prism and lens with a simple focus adjustment
• Complete with case, calibration screwdriver, plastic pipette and calibration solution.

• Type	Range	Resolution	Accuracy
  Sucrose	0 to 32% Brix	0.2	±0.2%

Digital flame Photometer wit h two filter (NA & K) 2.5 digit LED display along with compressor and other accessories.

·         2 Filter Na, K

·         Range from 0 to 100 ppm

·         Narrow band interference glass filter LPG & dry oil free air

·         Measure one element at a time Single Display21/2 digit bright red led Display.

·         Made of perforated steel plate with square holes.

·          Available in following aperture of 125,160,100, 90, 80, 75, 63, 53, 50, 45, 40, 37.5, 31.5, 26.5,25,22.4,19,16,13.2,12.2,11.2,10.2,10,9,5,
8,6.7,6.3,5.6,4.75,2.8 mm

·         Available In Size :
With brass frame 8" dia.
With G.I. frame 12" dia.
With G.I. frame 18" dia.

·         Refrigerated Low Temperature cabinet.

·          Better puff Insulated to avoid cooling loss.

·          Silent energy saving compressor.

·          Polish 304 grade Stainless Steel sheet interior.

·          Outer MS/CRC sheet powder Coated.

·          Optional: Outer S. Steel Body against customer requirement

·          Provide with Digital Temp. Controller Cum Indicator/Thermostat Bi-Metallic.

·          Small & Large capacity Mantle.

·          Electrical Heated hard knitted glass yarn without joint.

·           One pcs Spun body made from non-rusting Alum. Duly powder coated & stove enamel painted

·           Full feature panel with ER/Temp. Controller, Temp. Indictor & Mains Switch.

·          Better mineral/Glass-wool Insulated.

Additional Information:

• Delivery Time: 2 Weeks

·         Better Sunmica & Plywood duly varnished duly painted Excellent wooden & Castor wheel for easy movement.

·         Silent Air Blower unique design of Circulation for uniform air movement.

·          A Horizontal unit flow clean bench has an open worktable featuring a reliable & easy control.

·         Low noise & low vibrations motor is adopted for, the speed can be adjusted step by step, The thin switch on panel make a reliable & easy control.

·          The work table pattern is made of S. Steel sheet nice & durable. The external panel is finished with sun-mica sheet nicely fixed.

·         Full feature Hepa Filters, Pre-filters comprising of non-woven micro fibre glass pleated media, pleats are separated by corrugated Alum. Foil separators, HEPA filters are protect by plastic grill.

·          The side panels are made of good quality Thick Perspex sheet duly framed in anodized Alum.

·         Working Bench is fitted with Fluorescent Light & UV Germicidal light having separate control in front.

Additional Information:

• Delivery Time: 2 Weeks

Additional Information:

• Delivery Time: 3-4 Weeks

• Rugged case and electronics
• Large LCD displays CO levels from 0 to 1000 ppm
• Bright back-light allows easy screen viewing under dim lighting conditions
• Beeper triggers with increasing frequency as CO levels rise 
• MAX Hold function stores and displays the maximum CO level
• Automatic sensor zeroing and self-test sequence upon start-up
• CO level beeper can be silenced if desired
• Automatic power-off after 20 minutes extends battery life
• Easy to replace battery
• Replaceable sensor extends tool life
• C50 soft carrying case, battery and instruction sheet
• Stabilized electrochemical CO specific sensor
• Typical two year sensor life; one year calibration cycle
• Battery life typical 500 hours with alkaline battery
• Updated sensor

• The portable anemometer provides fast accurate readings with digital readability and the convenience of a remote sensor separately.
• Multi-functions for air flow measurement m/s, km/h, ft/min, knots.
• Low-friction ball-bearing design resulting in accuracy at both high and low velocities.
• Conventional twisted vane arms, always a source of unreliability have been eliminated.
• Data Hold
• Compact housing cabinet
• Wide applications use this anemometer to check air conditioning & heating systems, measure air velocities, wind speeds, temperature etc
• The portable anemometer provides fast
• Data Hold function for stored the desired the convenience of a remote sensor separately
• Low-friction ball-bearing design allows free condition
• high & low velocities. including a strong, light weight ABS-plastic
• Sensitive balanced vane wheel rotates freely housing case
• Conventional twisted vane arms, always a check air conditioning & heating systems,source of unreliability have been eliminated. measure air velocities, wind speeds,Compact housing cabinet, easy to carry out temperature...etc
• Built-in low battery indicator

·         Feature: MS/ CRC Sheet Cast steel chamber duly painted, recommended for milling for sample, animal hair, bones cotton seeds organic drug, Leather, tobacco Wheat & other material

·          Designed for preparation of material for lab. Analyses without loss of moisture due to heating.

·          With 2 Stationery blade & rotor.

·          With 4 cutting edges.

·          Sample introduces through hopper & Cover fitted with 1/WP Motor.

·          Three deliveries S. Steel sieves of 20,40 & 60 mesh with plastic receiver.

·          Removable glass plate forms the face of grinding chamber & Permit observation during operation.

·          Small & Large size extraction.

·          Electrical heating hard knitted glass yarn.

·          MS/CRC sheet outer body having provision for MS top duly painted for 3 & 6 Mantles.

·          Supplied with 2 Nos. Vertical / Horizontal rods with gutkas& screw to hold flask.

·          Suitable to heat Soxhlet flask of 50 to 500ml capacity.

·          Supplied without Glass Parts.

·         Better-fabricated assembly frame heavy mild steel section duly painted or powder coated.

·         Counter Balanced drive mechanism ensure high stability & reliability in regular operation

·         Available Fixed & Variable Speed.

·         Maintenance free Induction drive motor.

·          Variable speed from 100 to 180 RPM & 20 to 180 RPM as per requirement

·         Uniform platform to accommodate interchangeable clamps of different size for different capacity of Flask.

·         Uniform circulation of 19mm diameter to Load platform in Horizontal Plane.

·         Stand:- Heavy Cast Stand with Steel Rod.

·         Evaporating Flask 1 Litre (approx.) with Standard B-29 joint.

·         Glass Duct All Glass connector cone with B-29, Connected Evaporating Flask and Protrudes in the condenser.

·         With Clip to hold the Evaporating Flask with Glass Duct.

·         Condenser Double Coil Condenser for water Circulation, fitted with Vacuum Connection and standard S-35, ball joint for Receiving Flask with Condenser.

·         Receiving Flask 1 Litre Capacity with Standard S 35 Ball Joint.

·         Ball Joint clamp:-To hold the Receiving Flask with Condenser.

·         High Vacuum Cock: Two way stop-for the feeding Tube and Vacuum Release. Feed Tube.

·         Rotary Oil sealed Pumps are quiet operating & Vibration less.

·         MS Angle & sheet housing duly painted.

·          Designed for continuous duty.

·         Pump mechanism contained in metal case with oil sight gauge drain plug at base.

Available in various capacities, designed to fit a variety of space and storage requirements. The refrigerators are equipped with heavy-duty compressors to maintain a vital operation temperature of OoC to 20oC . Superior refrigeration technology and precise temperature control to ensures reliable storage. Foamed -in- place CFC free PUF insulation ensure temperature stability and reduced energy temperature. Micro-controller controls the internal temperature between 0 oC to 20 oC with an accuracy of ± 0.5oC. The cooling is effected by a hermetically sealed CFC FREE ECO FRIENDLY COMPRESSOR.

·         For mixing & grinding electrical operated.

·         Capacityofafewgramtol&2Kg.

·         Fitted with FHP motor.

·          The unit Drive with maximum speed of 80 RPM.

·          Aluminium Heavy duty Jar.

·          Steel Balls of different Size to put in Jar for mixing & grinding pesticide Powder.

·          Interchangeable & removable Jar.

·         Fitted with F.H.P. motor having speed regulator and Maximum speed 4000 RPM with perforated S.S. disc.