New Delhi, Delhi
GST No. 07AAACS1068D1ZQ
Call 08048611436 75% Response Rate
Product Brochure
Capacity | 2 L |
Display Mode | Digital |
Body Material | Stainless steel |
Ultrasonic Frequency | 30 kHz |
Power | 200 W |
Current Type | 220-240 V | 50 Hz |
Dimension | 330x270x310 mm |
Color | Silver |
Usage Area | Lab |
Brand: Wensar
Models available: 2 Ltr. - 100 Ltr. Capacity
Features:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | 5770 |
Brand | W360 |
Usage/Application | Laboratory Use |
Additional Information:
View Complete details
Product Brochure
Material | Stainles steel LABMAN |
Color | Mirror Finish |
Usage/Application | Laboratory |
Standard | STAINLESS STEEL |
Packaging Type | BOX |
Class | E1 E2 F1 F2 |
Country of Origin | Made in India |
Stainless Steel weights are available in a varity of styles including
The weights are manufactured from high grade stainless steel that possesses closely controlled density, low magnetic susceptibility, good stability and resistance to corrosion and handling damage.
Weights are available in sizes ranging from 50kg through 1mg in all OMIL Prescribed classes i.e. E1E2 F1F2 M1M2 .
Stainless steel test weights are primarily used to test commercial weighing devices by state and local weights and measure officials, device installers, and the service technicians.
View Complete details
Minimum Order Quantity | 1 Packet |
Body Material | Glass |
Packaging Size | Pouch |
Usage/Application | Laboratory |
Country of Origin | Made in India |
Additional Information:
View Complete details
View Complete details
View Complete details
Order No. |
178-561-01A |
178-561-02A |
178-563-01A |
178-563-02A |
178-565-01A |
178-565-02A |
Model No |
SJ-210 |
SJ-210 |
SJ-210 |
SJ-210 |
SJ-210 |
SJ-210 |
Image |
- |
|
- |
- |
- |
- |
Drive Unit |
Standard type |
Standard type |
Retractable type |
Retractable type |
Transverse tracing type |
Transverse tracing type |
Detector |
0.75mN type |
4mN type |
0.75mN type |
4mN type |
0.75mN type |
4mN type |
Display unit |
Compact type |
Compact type |
Compact type |
Compact type |
Compact type |
Compact type |
Stylus tip radius |
2µm |
5µm |
2µm |
5µm |
2µm |
5µm |
Dect measuring force |
0.75mN |
4mN |
0.75mN |
4mN |
0.75mN |
4mN |
View Complete details
Product | Stock code | Standard Size |
---|---|---|
N1000 Viscosity Standard 0.12 L | 9727-C52.004 | 0.12 L / 4 oz |
N1000 Viscosity Standard 0.5 L | 9727-C52.016 | 0.5 L / 16 oz |
N1000 Viscosity Standard 0.95 L | 9727-C52.032 | 1 L / 32 oz |
N1000 Viscosity Standard 3.8 L | 9727-C52.128 | 4 L / 128 oz |
View Complete details
Minimum Order Quantity: 1 Piece
Phase | C18 |
Type | Normal Phase |
Brand | Thermo fisher |
Additional Information:
View Complete details
Minimum Order Quantity: 1 per unit
Size/Dimension | Different Models |
Brand | REMI |
Type | Laboratory Centrifuge |
Laboratory Centrifuges model R-8C BL & R-8M are suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, these units are truly versatile.
Micro Centrifuges models RM-12C BL & R-12M are ideal for growing routine application in biochemical and clinical labs, for Hematocrit, Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc.
View Complete details
Application areas: Suitable for lab and industry application
Features???Basic peristaltic pump with wide flow range, easy to use.
View Complete details
View Complete details
Product Brochure
Power Consumption | 220/230 V AC +-10%, Single Phase 50Hz |
Model Name/Number | IIC - 125 |
Temperature Range | 120 DegreeC approx,at 15- 20PSI approx. |
Pressure Range | 5to 20PSI +- 3PSI |
· Outer SS sheet chamber inner S.S. 304
· Unique design of Radial locking for minimum steam loss, assure accurate steam generation / sterilization.
· S. Steel 304 grade argon welded cylindrical innerTank/Vessel having S. Steel tabular immersion heater for steam generation.
· Lid is made of Thick mild Steel Plain Lined with S. Steel sheetfor double protection.
· Fitted with Painted mild steel Ring & Radial locking duly chrome plated.
· Paddle lifting device is also provided.
· Lid is having built in safety valve, Release Valve Pressure gauge, water level I Indicator
· Supplied with S. Steel cylindrical basket.
· Pressure range is adjustable from 05 to 20 PSI ± 3 PSI or better.
MODELS
IIC 125A
IIC 125 B
IIC 125 C
IIC 125 D
IIC 125 E
IIC 125 F
Liters
22 Ltrs.
40 Ltrs.
50 Ltrs.
78 Ltrs.
98 Ltrs.
187 Ltrs.
Interior (mm)
250x 450 mm
300 x 500mm
350 x550mm
400 x 600mm
450 x600mm
550 x750mm
Heater "W" Wattage
2K.W.
2K. W.
3K.W.
4K.W.
4K.W.
4K.W.
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Stainless Steel |
Automation Grade | Semi-Automatic |
Design | Standard |
Body Material | Iron |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Stainless Steel |
Power | 220/230V AC Supply 50HZ single Phase |
Additional Information:
View Complete details
Temperature | Ambient to 250 DegreeC |
Material | Mild Steel |
View Complete details
View Complete details
Wavelength Range | 190-1100 nm |
Optical System | Single Beam |
Spectral Bandwidth | 2 nm |
Brand | Labman |
Wavelength Accuracy | +0.5nm |
Wavelength Repeatability | <0.3nm |
Photometric Accuracy | +0.5 % T |
Photometric Range | -0.3-3A ,0-200%T |
Photometric Repeatability | <0.3 % T |
Lamp Type | Tungsten Halogen Lamp, Deuterium Lamp |
Grating | 1200 lines/mm |
Data Output Port | USB & Parallel Port |
Display | Graphic LCD (128 x 64 ) |
Dimensions | 461 x 380 x 180 mm |
Weight | 18 kg |
Make | LABMAN |
Wavelength Range | 190-1100 nm |
Spectral Band width | 2nm |
Optical System | Single Beam, Grating 1200 lines / mm |
Scanning, Kinetics & DNA/Protein | Features Available with Software only. |
Wavelength Accuracy | +0.5nm |
Wavelength Repeatability | <0.3nm |
Photometric Accuracy | +0.5%T |
Photometric Repeatability | <0.3%T |
Photometric Range | -0.3-3A ,0-200%T |
Stability | +0.002A/h @ 500nm |
Stray Light | <0.1%T @ 220nm,340nm |
Output | USB & Parallel Port (Printer) |
Display | Graphic LCD (128 x 64 ) |
Cell Holder | 10mm 4 position, cuvette holder |
Light Source & Detector | Deuterium Lamp & Tungsten Halogen Lamp |
Power supply | 220V / 50Hz |
Dimension & Weight | 461 x 380 x 180 mm & 18kg |
View Complete details
Automation Grade | Automatic |
Is It Portable | Portable |
Oil Immersion | No |
Eyepiece | EWF 10X FOV 18mm |
View Complete details
Material | CRC / MS sheet duly powder coated |
Power | 230V AC supply 50HZ single Phase |
Model Name/Number | IIC - 117 |
Illumination | By Tubes Light (With choke + Stirrer) Duly covered by Perspex sheet having control switch on the Equ |
· Designed for Floe formation Test in water treatment plant.
· Uniform Stirring of up to 6 samples simultaneously.
· Variable speed 20100 RPM.
· Heavy duty 1/20HP motor with gear train mounted on a mild steel housing.
· Supported by four rods on a bench.
· Stainless steel stirring paddlers with Adjustable height.
· Locking collars or stirring rods permit adjustment height of paddle height.
Spacing of 6" (150mm) between rod permit use up to 1000ml Beaker.View Complete details
Model Name/Number | IIC - 123 |
Mental type (Without glass parts & Clamps) Useful for estimation of nitrogen contents, The housing of mild steel sheet duly powder coated unit of 3/6 Test as per detail (Given Above with lead fume duct & pair of hangers. Complete in all respect.
· Unit of 3 Sets
· Unit of 6 Sets
View Complete details
Model Name/Number | DV1 |
Brand | Brookfield |
FEATURES & BENEFITS
View Complete details
Application :
Impact COD Digestion System is a compact setup designed for the estimation of Chemical Oxygen Demand in water/waste samples. The setup is based on the APHA Method in which sample is digested with sulphuric acid and potassioum dichromate at 150 Deg. C. in a reflusxing assembly to determine the pollution load by measuring theamount of oxygen required to oxidize and convert the organic waste into carbon dioxide and water.
Available In Size :
06 Sampler Digestor.
12 Sampler Digestor.
15 Sampler Digestor.
MODEL |
IIC-511 A |
IIC - 511 B |
IIC - 511 C |
IIC – 511 D |
Capacity |
6 Samples |
12 Samples |
15 Samples |
25 Samples |
Tube Size |
40x200mm with B14 Interchangeable Socket. |
|
||
Condenser |
640 mm with bulb, funnel and B-34 Interchangeable Cone. |
|
||
Timer/Process |
Programmable electronic digital timer. |
|
||
Temp. Range |
5 Deg. C. above ambient to 200 Deg. C. |
|
||
Temp. Controller |
Microprocessor based programmable Digital Temperature Indicator-cum-Controller with 7 Segment L.E.D. Display Pannel. |
|
||
Safety features |
Over Temperature Proctection, and Autotuning provision. |
|
||
Power |
230 V 50 Hz AC mains. |
|
View Complete details
Material | Cast Iron & MS sheet duly Painted 220/230V AC |
Model Name/Number | IIC - 113 |
Power Consumption | supply 50HZ single Phase Continuous |
· Heavy duty cast I ron body with 2 sides arms.
· Suitable Flask holding clamps.
· Maximum oscillation up to 500 per minute.
· Flask Cap. 100ml -1 Liter Conical or round bottom.
· Shaking speed action variable controlled by speed regulator.
Fitted with fractional HP motor.
MODELS |
IIC 113 |
IIC 113A |
Capacity |
To Hold 4 Flask |
To Hold 8 Flask |
View Complete details
Model Name/Number | ADP-45 |
|
|||||||||||||||||||||||||
|
View Complete details
Power Consumption | 220/230V AC Supply Single Phase +- 10% 50Hz |
Material | Brass/ S. Steel duly Nickledchromimum plated water jacket S. S. vessel S.S. Bomb, Water Vessel |
· Used for determination of combustion of heat of calorific value of the fuel & other organic material.
· Designed as per specification of Institute of Petroleum BS1016 standard IS No. 13501966.
· Supplied complete with water jacket made of Brass/S. Steel sheet duly nickled chromium plated with bakelite Lid
· S. Steel Bomb, Bomb Jacket, Water Colorimeter Vessel.
· Motorised heavy duty stirrer for uniform Circulation.
· Briquilt, Pellet Press heavy duty.
· Firing unit with Illuminator.
· Vibrator & Buzzer, spanners, magnified glass with nickled-nichrome wire & Cotton reel.
· Gas Releasing Valve, S. Steel crucible.
· Benzoic Acid with known calorific value.
Full feature Digital Controller & Safety deviceView Complete details
As Per IS : 4031 1968, IS : 1344 1959, BS 4550
The Vibrating Table is used for compacting concrete cubes and cylinders.
It is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinetJhe vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of thetable top.
The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table duringvibration. A cross arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating thetable. The variable pitch pulley arrangement permits the frequency to be varied step-less between a maximum of 3600vibrations per minute.
A speed regulation handle is provided for increasing or decreasing the frequency. A switch is providedfor starting the motor, suitable for operation on 440 volts, 3 phase, 50 cycles, AC supply. Vibrating Tables of table top size 75cm x 75cm as well as 100cm x 100cm are also available
View Complete details
Temperature Range | 5 DegreeC- 60 DegreeC |
Material | CRC / Mild Steel Sheet with powder Coated |
· Refrigerated Insulation & Freezing in one unit.
· Put Insulated to keep the surface Temp, of body comfortable & avoid Cooling loss.
· Silent energy saving Kirloskar/ Tecumseh compressor, Designed to circulate uniform air throughout the chamber with better imported coil condenser copper coil, improved Temperature distribution.
· Polish 304 grade S. Steel interior corrosion resistant long life operation having adjustable shelves to make more space for different Height.
· Kanthal A-1 tubular heater is fitted for better accuracy.
· Safety Controller are provide with the Digital Temperature Controller Cum Indicator.
· Full features with Digital Temp. Controller Cum Indicator & Microprocessor Based PID Temperature Controller Cum Indicator with Digital Voltmeter.
· Choose among the model with window front glass door or inner Perspex / Acrylic sheet full view door to observe the Test.
· Process inside the incubatoras desired while keep temperature uninterrupted.
· Angle Iron Frame at bottom with castor wheel for easy movement.
· Fitted with 2 Nos. Fan (One for Cooling & One for Heating inside the chamber)
View Complete details
MODEL |
IIC 149 |
IIC 149 A |
IIC 149 B |
IIC 149 C |
Internal Working Zone |
2' x2'x2' |
3'x2'x2' |
4' x 2' x 2' |
6'x2'x2' |
Illumination |
1 x 20watt |
1 x 20watt |
2 x 40watt |
2 x 40watt |
Electrical Load required |
220Volts |
220Volts |
220Volts |
220Volts |
Power Supply |
Single Phase |
Single Phase |
Single Phase |
Single Phase |
View Complete details
Material | CRC/MS sheet duly Painted |
· Vibration type variable speed genie short rapid electronic stroke motor drives.
· Neoprene cup in parts vigorous agitation to tube or small flask.
· Shaking starts when vessel is pressed against cup.
· Fitted with Vacuum Rubber at the bottom to prevent walking.
· Outer casing made of MS/CRC sheet duly to painted / Powder coated
MODEL |
IIC 141 |
IIC 141 A |
Touch On/ Off |
Without Touch |
View Complete details
Temperature Range | Ambient to 50 Degree C |
Material | CRC/ Mild Steel Sheet Duly Powder Coated 220/230 V |
Power | AC +-10%, 50HZ single Phase Water Level or Low level |
Model Name/Number | IIC - 107 |
Relative Humidity | Ambient to 95%+- 3% |
· Precise Hot Air & Humidity
· Better Mineral I Put Insulation Keep the surface Temperature comfortable & Avoid Heat & Humidity Loss.
Silent Hot Air Blower, Unique design of Air Circulation & Humidity circulation & improved Temperature / Humidity distribution.
· Unique design of Ventilation.
304 grade of S. Steel interior Corrosion resistant long life operation.
MODELS |
IIC 107 |
IIC 107 A |
IIC 107 B |
IIC 107 C |
Capacity (Liter) |
112 Ltrs. |
171 Ltrs. |
280 Ltrs. |
340 Ltrs. |
Volume |
4 Cuft |
6 Cuft |
10 Cuft |
12 Cuft |
Interior (mm) |
455 x410x610 |
505 x415 x830 |
570 x 550 x 875 |
650 x 580 x 900 |
View Complete details
Frequency | customizable |
Type | Digital |
Height | 350x270 280mm |
Country of Origin | Made in India |
Additional Information:
View Complete details
Material | All Stainless Steel 304 grade |
Power Consumption | 220/230V AC +- 10%, 50HZ single Phase |
Precise pure Pyrogen free distilled water Design feature ensure economy in operation.
AII Stainless Steel 304 grade body.
Unique design of water over flow & water level & outlet.
Kanthal A-1 super quality kettle element for better result/ejection type.
Condenser tube & Jacket all made of S. Steel 304 grade sheet/pipe.
Condenser tube can bedismantled by removing the wing nut which holds condenser & Jacket.
With wall bracket to be fixed on wall on which the still can restView Complete details
CONSTRUCTIONAL FEATURES
· Inner bath chamber & lid made of stainless steel (SS-304 grade).
· Outer body made of MS sheet duly powder coated.
· Space between inner and outer chamber filled with high grade PUF insulation.
· Mounted on castors for easy portability.
STANDARD FEATURES
· Various temperatures ranges available to choose from depending upon varied requirements and applications.
· Microprocessor based PID DIGITALTEMPERATURE INDICATOR CUM CONTROLLER.
· Powerful circulation pump To work on 220/230 volts, 50/60 Hz AC Supply.
MODEL |
IIC-169 |
IIC-169 A |
IIC-169 B |
IIC-169 C |
IIC-169 D |
IIC-169 E |
Temp. Range |
Ambient To 0°C |
80 degree to 0 degree |
Ambient To 0°C |
80 degree to 0 degree |
Ambient To 0°C |
80 degree to 0 degree |
Capacity |
05 Liters |
05 Liters |
10 Liters |
10 Liters |
20 Liters |
20 Liters |
View Complete details
Outer Material | CRC/ Mild Steel Sheet duly Powder Coated |
Model Name/Number | IIC - 105 |
Ambient Temperature | Ambient to 95 DegreeC |
View Complete details
Ambient Temperature | Ambient to 95 DegreeC/100 Deg C +- 1. DegreeC or Better |
· Control Panel : Temp. Controller, With Mains & Load Indicator, Mains Switch
View Complete details
Model Name/Number | IIC - 121 |
Power | 220/230V AC supply 50HZ |
Material | CRC / MS Sheet duly powder coated |
· Useful for counting Bacterial mould In culture Test/Work.
· Provide uniform glaze free illumination to minimize the strain on eyes
· Clearly defines even small colonies.
· A100mm (4") dia lens covers the entire illumination field &its magnification assures high quality results.
· Counting plates with (Wo fhugel) ruling ensures clearly differentiated & shapely defined Colonies.
· Supplied with counting plate, Plate, Lens, Counting Pen & its cover
· Full feature digitally controlled.
Outer casing CRC/MS sheet duly powder coated.
MODELS |
IIC 121 |
IIC 121 A |
3 Digit |
4 Digit |
View Complete details
Model Name/Number | IIC - 119 |
Temperature Range | Ambient to 60oC +- 0.5oC |
Power | 220/230V AC supply +-10% single Phase 50HZ |
· Better quality S. S. 304 grade inner chamber & Outer M.S. duly powder coated chamber with Plexi glass inner door (Can see through Plexi Glass Cover).
· Powerful air circulator for Temp. Uniformity.
· Digital RPM/Temp. Indicator having pre set facility.
· Universal platform having interchangeable clamps of assorted size for difference cap. Of Flask i.e. 100ml/150ml/250ml/500ml
· Variable speed 20to 250 RPM/300 RPM
Refrigerated Model with 24 Hrs. Timer/Digital/UV Light/2 Illumination (on customer request).
MODELS |
IIC 119 |
IIC 119 A |
Capacity |
130 Ltrs. |
180 Ltrs. |
Shaking capacity |
9 Ltrs. |
9 Ltrs. |
Heater "W" Wattage |
150W |
250W |
Dimension |
450x450x450 |
550x550x550x |
Shaking Tray |
01 No. |
01 No. |
View Complete details
Model Name/Number | IIC - 120 |
Temperature Range | Ambient to 250 o C. |
Power Consumption | 220/230V AC +-10%, 50HZ |
· Precise for oxidation stability Test on Oil & Grease
· Useful for Calibration of Thermometer & Thermocouple.
· Better Mineral/Cera blanket Insulated to avoid loss of heat & gives better result.
· Polish/Hair Line 304 grade heavy steel sheet duly argon welded to avoid leakage at high Temp, during Test.
· Diffuser plate for the safe handling during test.
· Kanthal 1 special S. S. quality Oil Heaters are fitted to cover oil Bath & gives uniform/ heat Temp. Throughout the Chamber.
· Full feature Digital Temperature Controller Cum Indicator & Microprocessor based PID Temp. Controller can be made (on Customer request).
· Best quality Bi-Metallic capillary Thermostat can be fitted in place of Digital Temp. Controller / PID Controller (On Customer request).
Best quality 1/20 HP stirrer is fitted on the backside for uniform circulation of liquid & Temperature Bath.
MODELS |
IIC 120 |
IIC 120 A |
IIC 120 B |
Capacity (L) |
12 Ltrs. |
18 Ltrs. |
20 Ltrs. |
Interior (mm) |
200x250x250 |
300x250x250 |
300x300x250 |
Wattage "W" |
1.5 KW |
2.0 KW |
2.0 KW |
Diffuser Plate / Shelves |
01 No. |
01 No. |
01 No. |
View Complete details
Usage/Application | Laboratory |
· A biosafety cabinet (BSC) – also called a biological safety cabinet or microbiological safety cabinet is an enclosed, ventilated laboratory work space for safety working with materials contaminated with (or potentially contaminated with) pathogens requiring a defined biosafety level.
· Air flow : 30% air exhaust 70% air recirculation.
· HEPA – filtered exhaust air in Type A2 cabinet may be recirculated into the room or exhausted to the outdoors through a canopy exhaust connection.
· HEPA – filtered downflow air is a portion of mixed downflow and inflow air from a common plenum
· Negative Pressure air surrounding all biological contaminated ducts and plenums.
· Negative pressure surrounds the work are with double wall plenums for protection
· Air drawn through pre-filter is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air borne particles of size 0.3 micron and large. The highly efficient HEPA filter maintains the optimum cleanliness and purity. Being equipped with the prefilter, it can extend the life of HEPA filter.
Sash is counterbalanced for smooth and light weight operation with standard opening of 200mm±10mm for easier access to workzone and enhanced user safety
Model |
IIC 142 |
IIC 142 A |
IIC 142 B |
IIC 142C |
Working Zone |
2’x2’x2’ |
3’x2’x2’ |
4’x2’x2’ |
6’x2’x2’ |
Wooden |
2’x2’x2’ |
3’x2’x2’ |
4’x2’x2’ |
6’x2’x2’ |
Mild Steel |
2’x2’x2’ |
3’x2’x2’ |
4’x2’x2’ |
6’x2’x2’ |
Stainless Steel |
2’x2’x2’ |
3’x2’x2’ |
4’x2’x2’ |
6’x2’x2’ |
View Complete details